How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of special steps to install a second ignition key. This requires an electronic handheld computer, referred to as Tech-2 which is used by the dealer. Then the transponder must be replaced and a key have to be purchased.
It is an excellent idea to rotate your keys so that one does not get worn out more quickly than the other. This will help keep your keys in top condition.
Replacement Case
Contrary to the classic Saab keys of old keys, the latest key fobs have electronics inside which makes it hard to duplicate. This has made theft of cars considerably more complicated than it was 20 years ago. However, it has made the replacement of lost keys a comparatively expensive task.
Saab 9-3 owners should have two working keys. If one is lost, it is expensive to add another to the vehicle because it requires replacing the CIM module and reprogramming the locking cylinders. Dealers usually charge between $100 and $200 for this.
There are a few ways to avoid these high cost. Some parts providers will look up the code from a spare key (usually the same one that opens the doors and turns the ignition) and cut a brand new metal key blade for a fraction of the dealer's cost. The key, however, must be identical to the original one to function properly within your car.
You can also change the case yourself by following these steps. You will need a flathead screwdriver and some patience. With the screwdriver, you can pry away the plastic and take out the emergency key. When the case is opened take the electronics out and place them into your new case. Be sure to put the correct badge and key back into the case as well.
Replacement Battery
The replacement battery for the Saab 9-3 is a cheap component that can be replaced easily and quickly. This YouTube tutorial for DIY Cyclone Cyd, a user on YouTube, explains how to replace the remote key fob battery in only four steps. This guide should work with any modern saab key fob, however the procedure might differ slightly.
The button is normally located next to the Saab logo on the back of the fob. This button is usually located on the back of your fob, next to the Saab Logo. Use a flathead screwdriver to insert the screwdriver into the tiny hole in this button. This should be enough to unlock the case of the fob so that you can replace the battery.
After the new battery CR1632 is installed then you can reassemble your remote key fob and then program it to your car. The entire process should not take more than an hour at most. It's a simple procedure that doesn't require special tools.
If you lose your key, the process will be somewhat more complex but it is still able to be completed. saab 93 key must first read the VIN of the vehicle before requesting a replacement TWICE module and key blade with the proper unique code. The dealer will then have to program the key using MDI, a brand new software tool.
Replacement Key Fob
The key fob is a device that locks and unlocks your car, it's got a battery inside. The batteries are able to last for and will eventually go out of service. This is a regular issue that happens to all cars and the good news is that you can change the batteries on most key fobs and not have to replace the entire case. You can buy replacement fobs from Amazon that have all the electronics already in place, so you'll simply open the case and replace the batteries in the original case. You'll need to remove the emergency key before you replace the batteries. To do this, place an small screwdriver with a flat head into the slot in the middle. The screwdriver should be moved around the case, and it should split open, making it easy to remove.
If you are about to replace the keys make sure you have a spare as this can reduce your total cost by a significant amount. If you have an extra key, ask the dealer to cut it in half and program it to your vehicle. This is much cheaper than purchasing a new fob.
It is possible to add another key to your car if you don't already have one, however it requires a great deal of research and work. It costs around a hundred dollars to purchase a second car key. The computer in the car must also be programmed. This can be done by a professional, however it's a costly option for most owners.
Replacement Ignition
As opposed to the earlier Saab vehicles, the latest SAAB 9-3 models have an advanced alarm system that is built around a coded key. This means that when you lose your sole working key, replacing it with another key can be extremely expensive as the car has to have a unique computer module installed and it also must be specially programmed to accept an additional key. Locksmiths typically aren't able to program this or even dealers can charge several hundred dollars just to program the new key!
Dealers will charge you a premium to replace your car computer (also known as the CIM or SAAB twice) If you lose your only functioning key. We can reprogramme the existing EEPROM in your car computer so that it's ready for an additional key. This will save you more than 50% off the price you'd pay at an auto dealer.
If you've been a long time owner of a 03-11 SAAB 9-3, you likely have noticed that the ignition switch isn't all that robust. They can become incredibly sticky, and the buttons can be removed from them occasionally It is recommended that you consider purchasing a new one if yours isn't functioning properly. It's not as difficult as you think to replace the ignition key. With the appropriate tools, it could be accomplished in a short time.